Kern-sohn FKB 65K1A Instrukcja Użytkownika

KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen email: [email protected] Phone: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern

4 Basic Safety Precautions 4.1 Pay attention to the instructions in the Operation Manual Carefully read this operation manual before setup and commi

Major display deviations (incorrect weighing results) may be experienced should electromagnetic fields (e.g. due to mobile phones or radio equipment),

6.4 Operation using a (rechargeable) battery (optional) Lift-off the battery cover on the lower side of the balance. Connect 9 V compound battery. R

6.6 Initial Commissioning In order to obtain exact results with the electronic balances, your balance must have reached the operating temperature (se

6.9 Underfloor weighing Objects unsuitable for placing on the weighing scale due to size or shape may be weighed with the help of the flush-mounted p

7 Operation elements 7.1 Overview of display 7.2 Keyboard overview Key Designation Function PRINT-key • Calculate weighing data via interface

8 Basic Operation Start-up ONOFF  Press ON button. The balance will carry out a self-test The balance is ready for weighing when the weight display

 Weigh the material, the net weight will be indicated. 47.2g The taring process can be repeated any number of times, e.g. when adding several comp

Plus/minus weighings TA R E For example unit weight control, fabrication control etc.  Put the nominal weight on the weighing plate and tare using

• Back to weighing mode by pressing the MODE button. • Error message „Er 1“ Piece below minimum weight of piece (See chpt. 1 “Technical specifica

GB KERN FKB_A Version 1.3 01/2015 Operating Manual Compact balance Table of Contents 1 Technical Data ...

Percent determination MODECAL SETM Percentage calculation facilitates weight display in percent related to a reference weight equivalent to 100 %.

9 Menu 9.1 Navigation in the menu Access to menu In weighing mode keep the PRINT key pressed until [Unit] appears. P R IN T 0.0g Vn�T How to select

2. Change settings of several menu items Acknowledge selected menu item using SET key, the current setting is displayed. Use the MODE key to

Save/reject and exit the menu Either Any changes carried out are stored by pressing the SET key (yes). The balance returns automatically in

9.2 Menu overview Description of function Function Parameter Description of options Weighing units switching over (see chapter 9.3). UNIT g* Gram

Baud rate (see chapter 9.4). bAUd 19200 9600* 4800 2400 1200 Auto off (battery operation), see chap. 6.4 AF on* Automatic switch-off function

9.3 Description of individual menu items Weighing Units  In weighing mode keep the PRINT key pressed until [Unit] appears. 0.0g Vn�T 

Dosing and Zero-tracking 0.0g Vn�T Tl The Auto-Zero function is used to tare small variations in weight automatically. In the event that smal

FKB 8K0.1A FKB15K0.5A FKB15K1A FKB 16K0.2A 2000 5000 5000 5000 5000 10000 10000 10000 8000 15000 15000 15000 FKB30K1A FKB30K2A FKB 30K5DA FKB 36K0.5

Filter only models: FKB 8K0.1A FKB 65K1A (Example) This menu item allows the balance to be set according to specific ambient conditions and meas

8 Basic Operation ... 16 Start-up ...

Display background illumination 0.0g Vn�T BL  In weighing mode keep the PRINT key pressed until [Unit] appears.  Press the MODE button severa

Animal weighing function 0.0g Vn�T ANL The animal weighing function can be applied for busy weighing. During a defined period the average value o

Reset to factory setting 0.0g Vn�T RST� This function resets all balance settings to factory setting.  In weighing mode keep the PRINT key pres

9.4 Interface parameters Data output is carried out via interface RS 232 C. General The previous condition for the data transfer between balance an

printout 0.0g Vn�T LAPR� Using this function data are selected which are to be sent via the RS232C (not valid for data transfer mode BAPr ).  I

Baud rate 0.0g Vn�T BAUD� The baud rate defines the transfer speed vie the interface, 1 Baud = 1 Bit/second.  In weighing mode keep the PRINT ke

10.3 Explanation of the data transfer Pr PC: Press the PRINT key, at stable weight the format is transferred from LAPR. a. Format for stable valu

rE Cr: The remote control commands s/w/t are sent from the remote control unit to the balance as ASCII code. After the balance having received the s

10.4 Output on bar code printer The data transfer mode has to be set on „BA Pr“ (chapter 9.4). As bar code printer the Zebra printer model LP2824 is p

12 Instant help In case of an error in the program process, briefly turn off the balance and disconnect from power supply. The weighing process must

1 Technical Data KERN FKB 8K0.1A FKB 15K0.5A FKB 15K1A Readability (d) 0,1 g 0,5 g 1 g Weighing range (max) (d) 8 kg 15 kg 15 kg Taring ran

KERN FKB 16K0.2A FKB 30K1A FKB 30K2A Readability (d) 0,2 g 1 g 2 g Weighing range (max) (d) 16 kg 30 kg 30 kg Taring range (subtractive) 16

KERN FKB 30K5DA FKB 36K0.5A FKB 60K2A Readability (d) 5 g/10 g 0.5 g 2 g Weighing range (max) (d) 15 kg/30 kg 36 kg 60 kg Taring range (subt

KERN FKB 60K5A FKB 60K10DA FKB 65K1A Readability (d) 5 g 10 g/20 g 1 g Weighing range (max) (d) 60 kg 30 kg/60 kg 65 kg Taring range (subtr

2 Declaration of conformity KERN & Sohn GmbH D-72322 Balingen-Frommern Postbox 4052 email: [email protected] Phone: 0049-[0]7433- 9933-0 Fax: 00

3 Basic Information (General) 3.1 Proper use The balance you purchased is intended to determine the weighing value of material to be weighed. It is