Kern-sohn FKTF Instrukcja Użytkownika

KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Tel: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-so

5.6 Adjustment As the acceleration value due to gravity is not the same at every location on earth, each balance must be coordinated - in compliance

6 Operation 6.1 Start the scale and turn on the screen Start scale by touching the touch panel Start-up screen: After contact the Touches and s

12 FKTF-BA-e-1511

FKTF-BA-e-1511 13

14 FKTF-BA-e-1511

6.2 Select Operator/Article Select Operator: After pressing the operator key se-lect fields will appear for authorized operators. Select the cu

Now in the first line of information the selected Item and the Item code appears (see arrows). 6.3 Start the measurement To start the measure

After the first measurement object has been placed it will be confirmed with TAKE GROS. The balance jumps automatically to the second target. At a

6.4 Creating products with desired specifications You can enter the specific values of each item under MENU / Memory / Item / Item*. On the fi

The automatic limit value calculation is active if under MENU / Configu-ration / Setting control mode / Tolerance the "tolerance" is set

GB KERN FKTF Version 1.1 01/2015 Operating Instructions Finished packaging regulations scale Contents 1 Technical Data ...

6.5 Activate operator Under MENU / Memory / Operator/ Activated you can activate the cre-ated operator, so that they are visi-ble on the start-up

Now, "Setting control mode" appears. This also choose. Under Setting control mode, then you can adjust various settings: Automatic:

7 Data output RS 232 C Technical data: 8-bit ASCII Code  1 start bit, 8 data bits, 1 stop bit, no parity bit  Baud rate selectable from 2400,

7.1.1 Explanation of the data transfer Each data transfer is structured as follows: Bit.Nr. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 N

9 Instant help In case of an error in the program process, briefly turn off the balance and disconnect from power supply. The weighing process mus

10 Declaration of conformity KERN & Sohn GmbH D-72322 Balingen-Frommern Postfach 4052 E-Mail: [email protected] Tel: 0049-[0]7433- 9933-0 Fax:

1 Technical Data KERN FKTF 3K0.5LM FKTF 6K1LM FKTF 12K2LM Accuracy class III III III Readability (d) 0.5 g 1 g 2 g Verification value (e)

KERN FKTF 30K5LM FKTF 60K10LM Accuracy class III III Readability (d) 5 g 10 g Verification value (e) 5 g 10 g Weighing range (max) 30.000 g

Packaged Goods Regulation (PGR/FPVO). To weighing scales specially designed for packaged goods applies § 22 of the Packaged Goods Regulation PGR.

Packaged goods manufactured and tested according to the rules stipulated by the Pack-aged Goods Regulation bear the following marking on their label

2 Basic Information (General) It is absolutely necessary that you read and understand the operating instructions prior to installation and commissi

3 Basic Safety Precautions 3.1 Pay attention to the instructions in the Operation Manual Carefully read this operation manual before setup and co

5 Unpacking, Setup and Commissioning 5.1 Installation Site, Location of Use The balances are designed in a way that reliable weighing results are a